Products
The more functions drive engineering offers,
the more important it is to have an effective tool for operating
drives and visualizing processes. The MOVITOOLS®® MotionStudio engineering
tool from SEW‑EURODRIVE offers you such a tool. With MOVITOOLS®® MotionStudio, you can
parameterize, program, and diagnose most of the inverter series from
SEW‑EURODRIVE.
Features:
- Convenient drive startup and parameter
setting
- Drive diagnostics using the built-in oscilloscope function
- Create application and user programs, in high-level languages
if required, right on the plant floor using the Assembler or using
the graphic programming interface
- View the status of connected devices
- Bus monitor
- Control technology functions
- Completed application modules for various applications
- Read out electronic nameplates
- Electronic nameplates of SEW‑EURODRIVE gearmotors are used
for automatic motor adjustment
- MOVITOOLS®® MotionStudio
supports engineering via:
- Ethernet
TCP/IP, PROFINET IO, EtherNet/IP, MODBUS TCP
- EtherCAT
- PROFIBUS DPV1, CAN, DeviceNet
and the manufacturer-independent
software interface TCI Tool Calling Interface
Your advantages:
- Free selection of communication paths
- Central master data maintenance
- Decentralized and application-specific diagnostics
- Use of the latest technologies for remote maintenance
- Easy introduction to SEW-‑EURODRIVE products
Uniform software system for different
product areas
MOVITOOLS®® MotionStudio
for consistent engineering Startup, control, diagnostics, communication,
and visualization
Overview of the tools and their functions
|
Tool
|
Function
|
|
|
- Configuration
and startup: To adapt the inverter to the connected motor and optimize
current, speed and position controllers
- Manual mode: The tool allows for manually controlling the
units directly from the PC.
|
|
|
- Parameter
tree: Standardized editor for configuring parameters for various
unit types.
- PDO Editor Process data editor for graphic configuration of
process data for MOVIAXIS® multi-axis
servo inverters®
- Gateway configurator: Standardized tool for diagnosing and
configuring UFx41B and DFx fieldbus gateways, with MOVIFIT® Classic
and Technology function levels
|
Diagnostics
and visualization
|
- Status: Support
for unit diagnostics, communicates general unit status information,
manual unit reset possible
- Application Builder: Editor for designing application-specific
visualization and application-specific diagnostics. Visualization
is connected via file download with the IPOS inverter program and
the parameter setting.
- Fieldbus monitor: Tool for running diagnostics on the communication between
the fieldbus and the unit (monitor mode), and the setpoint selection
on the unit independently of the control (control mode)
- Scope: Diagnostics using an oscilloscope program for all SEW‑EURODRIVE
inverters
|
|
|
- PLC Editor:
Programming of the controller series MOVI-PLC®® controller
using custom application programs, device-independent
- IPOS®assembler and
compiler
|
Contact
