Contact
 |
|
| |
Operating Instructions: MOVITRAC® B |
|
|
| |
System Manuals: MOVITRAC® B |
|
|
| |
System Manuals: MOVITRAC® B |
|
|
| |
Catalogs: MOVITRAC® B |
|
|
| |
Catalogs: MOVITRAC® B |
|
|
| |
Brochures: MOVITRAC® B Frequency Inverters |
|
|
 |
MOVITRAC® B
|
|
Compact
and inexpensive frequency inverter for power range of 0.33 to 100
HP.
1-phase and 3-phase mains connection
for AC 230 V and 3-phase mains connection for AC 460 V.
|
|
Technical data
|
|
|
Mains
connection
|
Power
range
|
|
230 V / 1-phase
|
0.33 to 3.0 HP
|
|
230 V / 3-phase
|
0.33 to 40 HP
|
|
460 V / 3-phase
|
0.33 to 100 HP
|
|
MOVITRAC® B
options
|
|
|
FBG11B
|
Easy-to-use plug-in
keypad
|
|
UBP11A
|
Parameter module
|
|
DBG60B
|
Plain text keypad
|
|
FSC11B
|
Communication module
for networking MOVITRAC® B via
an SBus or RS-485 and for diagnostics and configuration using a
PC.
|
|
FIO11B
|
Analog module with
setpoint input, analog output and RS-485 interface
|
|
MBG11A
|
Setpoint control
module
|
|
UFP11A / UFD11A
/ UFI11A
|
Fieldbus gateways
for PROFIBUS / DeviceNet / INTERBUS
|
|
UWS11A / UWS21B
/ USB11A
|
Interface adapter
|
|
DFP21B / DFE24B
/ DFD11B
|
Fieldbus interfaces
PROFIBUS / EtherCat / DeviceNet (CANopen integrated in basic unit)
|
|
MOVI-PLC®
|
Motion control
programmable in IEC 61331 with
powerful libraries
|
|
Application
version with IPOSplus® programming
|
|
|
Safe
stop in accordance with Cat. 3 for 3 AC 460 V units from 0.75 to
100 HP.
|
|
|
Accessories and options
|
|
|
MOVITOOLS® operating software MotionStudio
|
The MOVITOOLS® MotionStudio program package allows you to conveniently start up, set parameters and run diagnostics for MOVITRAC® B frequency inverters and MOVIDRIVE® MDX60/61B drive inverters.
|
|
MDR60A regenerative power supply unit
|
The MDR60A regenerative power supply unit can be used to supply multiple units with power using a central power supply connection.
In regenerative mode, the power is fed back into the supply system. By using MDR60A, you can save power and installation costs.
|
|
Braking resistor type BW
|
BW series braking resistors are available for operating MOVITRAC® B frequency inverters and MOVIDRIVE® MDX60/61B drive inverters as generators. Using an integrated temperature sensor, the resistor can be protected without external
monitoring.
|
|
Line choke type ND
|
ND series line chokes increase inverter overvoltage protection. This is an important characteristic in rough industrial power
supply systems, especially if the inverter is installed near a supply transformer.
|
|
Line filter type NF
|
NF type line filters are available for EMC compliant installation as specified by EN 55011. They suppress interference emissions
on the line side of inverters. These line filters ensure that limit value class B is maintained on the supply end.
|
|
Output choke type HD
|
HD series output chokes suppress interference emitted from unshielded motor cables. They enable the motor to meet limit value
class B requirements in accordance with EN 55011 in EMC-compliant installations. Output chokes provide an alternative to shielded
motor cables in EMC-compliant installations.
|
|
Output filter type HF
|
HF series output filters are sine filters that smooth out inverter output voltage. Output filters are used for group drives
to suppress discharge currents in motor cables and for long motor cables to prevent voltage peaks.
|
| back to top |
